L3610

Widest Range of Applications – the ideal analog level transmitter. It can be field configured to handle virtually all process materials. If your requirements change, the L3610 is easy to re-configure or re-range in the field. High Sensitivity and Stability – For critical low response applications. NULL-KOTE™ Circuitry – Makes the sensor immune to adverse effects of conductive coating build up. Designed to Survive – RF immune, vibration-proof, and conformal coated (tropicalized) circuit boards for additional protection – at no extra cost. Ten-Year Warranty – The only level instruments available with this unique assurance of quality. Wide Temperature Range – Standard process temperature range: -300 to + 500 F (-184 to + 260 C)	Factory Precalibrated – Field calibration, if needed, is quick and easy. No interaction between span and zero. Easy to Install – Probe and electronics install as single unit. No cable, delicate connectors, or separate enclosure. Built-In Self Diagnostics – provides assurance that the system is working properly. Easy-On Probe Connection – Automatically provides simple, fast installation and reliable operation without wires, connectors, or terminal strips. Simply screw probe into the housing. Modular Design – Allows easy troubleshooting and repair. Factory Mutual System Approval – Class I, II, III, Div.1, Groups C, D, E, F, & G/NEMA 4.
PRINCO’s L3610 NULL-KOTE™ Analog RF transmitter can be field configured to measure the level of virtually any process material, from lelectrically insulated products, such as refined oils, to conductive slurries – even viscous materials that cling to the probe. Advanced NULL-KOTE™ circuitry assures accurate readings even when conductive materials build up on the probe. Superior temperature stability and noise immunity, conformal coated circuit boards, self-diagnostics and pre-calibration provides for accurate, reliable, and easy-to-install level instrumentation.
Our Easy-On probe gives you reliable, automatic connection when the probe is screwed into the electronics housing. A complete selection of FM approved systems can be assembled using the L100 series probes shown on PRINCO's FM Probe Data Sheet #9501. Span Range From 20 pF to 50,000 pF. Probe lengths from 1 inch to 200 feet, depending upon application. Output Signal 4 to 20 mA dc. Power Requirements Standard Models: 95/135 VAC, 50-60 HZ, 5 Watts 22/27 VDC, 2.2 Watts Optional Model: 230 VAC Operating Temperature Range -30 to 150°F (-34 to 66°C) Temperature Stability ±0.015% per 1°F Linearity/Accuracy ±0.5% typical
	Repeatability ±0.1% Electronics Housing Explosion-proof Class I, II, III, Div. 1, Groups C, D, E, F, & G NEMA4. Agency Approval Factory Mutual Research Corporation System Approved.

PH:215-355-1500 ~ FAX: 215-355-7766

1020 Industrial Boulevard - Southampton, PA 18966