Universal PRINCO’s RF Impedance technology is ideal for the widest range of applications, from non-conductive, low dielectrics, to highly conductive materials which leave a thick coating on the sensor probe. Digital NULL-KOTE™ – Microprocessor controlled for the most effective cancellation of conductive coatings. Auto Gain Adust – SMART 1™ handles ranges up to 50,000 picofarads. Designed to Survive RF immune, vibration-proof, and factory precalibrated - at no extra cost. High Sensitivity & Stability For critical low response applications. | Easy-On Probe Automatically provides simple, fast installation and reliable operation without wires, connectors, or terminal strips. Easy to Install Integral electronics install as single unit. No special cable, delicate connectors, or separate enclosure. Easy to Configure • Tank shape ~ volume output • Level & volume units • Normal/reverse acting • Level/volume proportional • Damping • Maintenance • Polling address
|
Easy installation, set-up, and maintenance reduces overall operating costs substantially. A complete level system consists of the SMART 1™ used in conjunction with the appropriate L100 series probe as illustrated on PRINCO’s Probe Data Sheet. Span Range Probe lengths from 1 inch to 200 feet, depending upon application. (From 5 pF to 3,000 pF)
Output 4 to 20 mA (Point-to-Point) 4 mA (Multidrop)
Hart® Protocol Linearity / Accuracy ± 0.5% typical
Load 250 ... 750 ohms
Hart® Protocol Simultaneous transmission of 4-20 mA dc signal (500 ohm load) and digital FSK signal on one twisted pair. Digital series bit stream permits two-way communication, but does not affect or alter 4-20 mA analog signal.
|  
|
